Steps
1
To remove the air shroud from a two processor configuration system, hold the shroud at both ends and lift it out of the system.
Figure 21. Removing the air shroud — Two processor system
2
To remove the air shroud from a four processor configuration system:
a Remove the expansion card riser. See
Removing the expansion card riser
.
b Hook the expansion card riser on the side of the system by using the bale on the expansion card riser.
CAUTION:
To avoid damage to the PCIe cables connected to the NVMe cards installed in the expansion card
riser, ensure that you hook the riser to the system using the bale.
c Hold the shroud at both ends and lift it away from the system.
68
Installing and removing system components