Processor expansion module
The processor expansion module (PEM) is a mezzanine system board. By installing a PEM, you can upgrade your two processor system to
a four processor system.
Removing the PEM
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
Remove the expansion card risers.
4
Remove the air shroud.
Steps
1
Lift the PEM using the handle until the PEM is in an upright position.
2
Press the release latch on the cable and disconnect the cables connected to the connectors on the PEM.
Figure 62. Removing the PEM
3
Press the release latch on the side of the chassis and lift the PEM out of the system.
108
Installing and removing system components
