Figure 93. Installing system board
Next steps
1
Install the Trusted Platform Module (TPM).
NOTE:
The TPM plug-in module is attached to the system board and cannot be removed. A replacement TPM plug-in
module will be provided for all system board replacements where a TPM plug-in module was installed.
2
Replace the following:
a
Cable management bracket
b
Integrated storage controller card
c
Internal USB key (if applicable)
d
iDSDM/vFlash card
e
Processor expansion module (PEM)
f
Expansion card risers
g
Processor and heat sink module
h
Processor and DIMM blank
i
Memory modules and memory module blanks
j
Network daughter card
k
Fan cage with cooling fans
l
Air shroud
m
Power supply unit(s)
3
Reconnect all cables to the system board.
NOTE:
Ensure that the cables inside the system are routed along the chassis wall and secured using the cable securing
bracket.
4
Follow the procedure listed in
After working inside your system
.
5
Import your new or existing iDRAC Enterprise license. For more information, see Integrated Dell Remote Access Controller User's
Guide, at
Dell.com/esmmanuals
.
Installing and removing system components
143