Table 5. Rear view of the system
Item
Ports, panels, or slots
Icon
Description
1
PCIe expansion card slot 1
Enables you to connect PCI Express expansion cards.
2
PCIe expansion card slot
2
Enables you to connect PCI Express expansion cards.
3
Expansion card riser with
slot 3 and 4.
Enables you to connect PCI Express expansion card risers.
4
PCIe expansion card slot
5
Enables you to connect PCI Express expansion cards.
5
System identification
button
Press the system ID button:
●
To locate a particular system within a rack.
●
To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16
seconds.
NOTE:
●
To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
●
If the system stops responding during POST, press and hold
the system ID button (for more than 5 seconds) to enter
the BIOS progress mode.
6
PCIe expansion card slot
6
Enables you to connect PCI Express expansion cards.
7
BOSS-S2 card module
N/A
Enables you to connect BOSS card.
8
Rear drive module
N/A
Enables you to install two rear NVMe or SAS/SATA drives.
9
Power supply unit (PSU
2)
Indicates the PSU.
10
Power supply unit (PSU 1)
Indicates the PSU.
11
VGA port
Enables you to connect a display device to the system.
12
Optional OCP
N/A
This port supports OCP 3.0. The NIC ports are integrated on the
OCP card which is connected to the system board.
13
USB 3.0 port
This port is USB 3.0-compliant.
14
USB 2.0 port
This port is USB 2.0-compliant.
15
iDRAC dedicated port
Enables you to remotely access iDRAC. For more information, see
the iDRAC User's Guide at
16
Ethernet ports
The Ethernet ports that are integrated on the system board
provide network connectivity. These NIC ports can also be shared
with iDRAC when iDRAC network settings is set to shared mode.
NOTE:
For more information, see the
Dell EMC PowerEdge R750xs Technical Specifications
on the product documentation
page.
PowerEdge R750xs system overview
13
