Figure 74. Removing the M.2 SSD module
Next steps
1.
Installing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
Steps
1. Align the M.2 SSD module at an angle with the M.2 BOSS card connector.
2. Insert the M.2 SSD module firmly until it is fully seated in the M.2 BOSS card connector.
3. Using the Phillips #1 screwdriver, secure the M.2 SSD module on the M.2 BOSS card.
80
Installing and removing system components
