Verifying the operation of a new or replacement part
Use Navisphere Express
®
or Navisphere
®
Manager to verify the operation of a new or
replacement part.
If the storage system is running Navisphere Express, use Navisphere Express to verify the
operation of a new or replacement part.
If the storage system is running Navisphere Manager, use Navisphere Manager to verify
the operation of a new or replacement part.
Note:
All AX4-5 series storage systems ship with Navisphere Express installed. To use Navisphere
Manager, you need to upgrade your storage system to Navisphere Manager.
Verify the operation of a new or replacement part using Navisphere
Express
1. In a browser on a network-connected host, start Navisphere
®
Express for the storage
system by entering the IP address of an SP in the storage system.
2. In the
Navisphere Express
navigation pane, under
View
, click
Components
.
3. Scan the list of components to verify that all components are recognized and working
properly.
If fault lights on storage system are still lit, go to the
Celerra Tools
page on the
website for more information.
Verifying the operation of a new or replacement part using Navisphere
Manager
1. Start Navisphere
®
Manager for the storage system by entering the IP address in a browser
window.
2. In the
Navisphere Manager Storage
tree, locate the icon for the storage system in which
you installed or replaced the part, expand the storage-system icon, and select the
Physical
icon.
3. Expand the enclosure in which you installed or replaced the part, and navigate to the
part.
4. Verify that the part is in the enclosure and that it is not faulted.
Verifying the operation of a new or replacement part
15
Verifying the operation of a new or replacement part
