Dell Embedded Box PC5000, Service Manual

Page: 93 / 136

Replacing the serial ports
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in
Before working inside your Embedded Box PC . After working inside your
Embedded Box PC, follow the steps in After working inside your Embedded
Box PC . For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance .
Procedure
1 Connect the serial-port cable to the connector on the system board.
2 Insert the serial ports into the respective slots on the bottom cover.
NOTE: Match the port number with the number on the cable.
3 Replace the hexagonal screws that secure the serial ports to the bottom-cover.
Post-requisites
1 Replace the PCI/PCIe card (if necessary).
2 Follow step 2 to step 8 in “ Replacing the back cover ”.
93