Dell Embedded Box PC5000, Service Manual

Page: 11 / 136

Before working inside your
Embedded Box PC
NOTE: The images in this document may differ from your Embedded Box PC
depending on the configuration you ordered.
Before you begin
1 Save and close all open files and exit all open applications.
2 Shut down the Embedded Box PC.
The shut-down instruction varies depending on the operating system installed on
the Embedded Box PC.
NOTE: For more information, see the documentation of your operating
system for shut-down instructions.
3 Disconnect the Embedded Box PC and all attached devices from their electrical
outlets.
4 Disconnect all cables such as network cables from the Embedded Box PC.
5 Disconnect all attached devices and peripherals, such as keyboard, mouse, and
monitor, from the Embedded Box PC.
6 After the Embedded Box PC is unplugged, press and hold the power button for 5
seconds to ground the system board.
Safety instructions
Use the following safety guidelines to protect your Embedded Box PC from potential
damage and ensure your personal safety.
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in
Before working inside your Embedded Box PC . After working inside your
Embedded Box PC, follow the steps in After working inside your Embedded
Box PC . For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance .
11