System overview
The PowerEdge R6525 system is a 1U rack server that supports:
●
Two AMD EPYC
TM
7002 or 7003 series processors
●
32 DIMM slots
●
Two redundant AC or DC power supply units
●
Up to 4 x 3.5-inch, 8 x 2.5-inch, or 10 x 2.5-inch SAS, SATA, or NVMe drives.
NOTE:
For more information about how to hot swap NVMe PCIe SSD U.2 device, see the
Dell Express Flash NVMe PCIe
SSD User's Guide
Browse all Products
>
Data Center Infrastructure
>
Storage
Adapters & Controllers
>
Dell PowerEdge Express Flash NVMe PCIe SSD
>
Documentation
>
Manuals and
Documents
.
NOTE:
All instances of SAS, SATA drives, PCIe SSDs, and NVMe are referred to as drives in this document, unless specified
otherwise.
WARNING:
Consumer-Grade GPU should not be installed or used in the Enterprise Server products.
For more information about supported drives, see the
For more information, see the Dell EMC PowerEdge R6525 Technical Specifications on the product documentation page.
Topics:
•
•
•
•
Locating the Express Service Code and Service Tag
•
•
Rail sizing and rack compatibility matrix
Front view of the system
Figure 1. Front view of the 10 x 2.5-inch drive system
Table 1. Features available on the front of the system
Item
Ports, panels, and
slots
Icon
Description
1
Left control panel
N/A
Contains the system health, system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
●
Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
2
8
System overview
