Table 5. Right control panel (continued)
Item Indicator or button
Icon
Description
should not exceed 3 ft (0.91 meters). Quality of the
cable might affect performance.
NOTE:
For more information about the ports, see the
Rear view of the system
Figure 7. Rear view of the 10 x 2.5-inch drive system
Table 6. Rear view of the system
Item
Ports, panels, or slots
Icon
Description
1
Power supply unit (PSU 1)
For more information about the PSU configurations, see the
section.
2
PCIe expansion card riser
(slot 1)
N/A
The expansion card riser enables you to connect PCI
Express expansion cards. For more information about the
expansion cards that are supported on your system, see
section.
3
PCIe expansion card riser
(slot 2)
N/A
The expansion card riser enables you to connect PCI
Express expansion cards. For more information about the
expansion cards that are supported on your system, see
section.
4
USB 2.0 port (1)
This port is USB 2.0-compliant.
5
Power supply unit (PSU
2)
For more information about the PSU configurations, see the
section.
6
VGA port
Enables you to connect a display device to the
system. For more information, see the
7
USB 3.0 port (1)
This port is USB 3.0-compliant.
8
iDRAC dedicated port
Enables you to remotely access iDRAC. For more
information, see the iDRAC User’s Guide at
9
System identification
button
Press the system ID button:
●
To locate a particular system within a rack.
●
To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16
seconds.
NOTE:
System overview
13