Dell E521 - Dimension Motherboard UW457 0UW457, Owner'S Manual

Page: 117 / 164

Appendix
117
SATA Operation
(Off default)
The field configures the operating mode of the integrated hard drive
controller.
• RAID Off — No RAID support
• RAID On — SATA is configured for RAID on every boot.
SMART Reporting
( Off default)
This setting determines whether integrated drive errors are reported or not
during system startup.
Onboard Devices
Integrated NIC
( On default)
Enables or disables the integrated NIC controller. Settings are Off , On , On w/
PXE, or On w/RPL . When the On w/ PXE or the On w/RPL setting is active,
if a boot routine is not available from the network server, the computer attempts to
boot from the next device in the boot sequence list.
Integrated Audio
( On default)
Enables or disables the onboard audio controller.
USB Controller
( On default)
Enables or disables the internal USB controller. No Boot enables the controller
but disables the ability to boot from a USB device.
NOTE:
Operating systems with USB support will recognize USB floppy drives
regardless of the No Boot setting.
Rear Dual USB0
( On default)
Enables or disables the indicated group of USB ports on the back of the
computer.
Rear Dual USB1
( On default)
Enables or disables the indicated group of USB ports on the back of the
computer.
Front USB
( On default)
Enables or disables the indicated group of USB ports on the front of the
computer.
Video
Primary Video
( Auto default)
Specifies which video controller is primary when two video controllers are
present on the computer.
Auto enables the add-in video controller. Onboard
enables the integrated video controller.
Video Memory Size
( 64MB default)
This setting configures the amount of system memory that is reserved for the
integrated video controller. The settings are Auto, 16MB, 32MB, 64MB,
128MB, or Off.