Dell E156FPc, Service Manual

Page: 22 / 70

Dell E156FPc
22
6. Disassembly Flow Chart
Tools: 2 Power screwdrivers ( φ =5mm,L=60mm); 1 small cross screwdriver; turnbuckle driver;
Setting: Power screwdriver torque A=11 kgF. Cm; torque B=6 kgF. Cm
Note: Firstly, put the monitor on a soft, flat and clean surface, wear gloves.
Fig Remark
Remove stand:
Press the Stand release button
and lift up the Stand and away
from the monitor.
Remove bezel
:
1. Remove the 4 screws by
torque A
2. Pry the monitor up then find
out the hooks’ position, use
the tool (like the picture or
other card) to insert into the
gap of bezel and rear cover.