Back to Contents Page
CMOS Time and Date
Not Set
Diskette Boot
Failure
Drive A or B is present but has failed the BIOS
POST.
Ensure that the
drive
is installed correctly in the chassis and
defined correctly in the
system setup program
. Check the
interface cable at both ends.
DMA Error
DMA 1 Error
DMA 2 Error
Error in the DMA controller on the system
board.
The keyboard or
system board
may need to be replaced.
FDD Controller
Failure
HDD Controller
Failure
BIOS cannot communicate with the diskette
drive or hard-disk drive controller.
Ensure that the
drive
is installed correctly in the chassis and
defined correctly in the
system setup program
. Check the
interface cable at both ends.
INTR1 Error
INTR2 Error
Interrupt channel on the system board failed
the POST.
The keyboard or
system board
may need to be replaced.
Invalid Boot
Diskette
The operating system cannot be located on
drive A or drive C.
Enter the
system setup program
and confirm that drive A or drive
C is properly identified.
KB/Interface Error
An error occurred with the keyboard
connector.
The keyboard or
system board
may need to be replaced.
Keyboard
Error
nn
The BIOS has detected a stuck key
represented by scan code
nn
.
Make sure that nothing is resting on the keyboard; if a key
appears to be stuck, carefully pry it up. If the problem persists,
you may need to replace the keyboard.
No ROM Basic
The operating system cannot be located on
drive A or drive C.
Enter the
system setup program
and confirm that drive A or drive
C is properly identified.
Summary of Contents for DimensionL Series
Page 8: ......
