manualshive.com logo in svg

Dell Dimension 3100C, Owner'S Manual, Page: 13 / 134

Share
Download
Dell Dimension 3100C Owner'S Manual Download Page 13

Setting Up and Using Your Computer

13

Setting Up and Using Your Computer

Setting Up a Printer

 

NOTICE: 

Complete the operating system setup before you connect a printer to the computer.

See the documentation that came with the printer for setup information, including how to:

•

Obtain and install updated drivers

•

Connect the printer to the computer

•

Load paper and install the toner or ink cartridge

•

Contact the printer manufacturer for technical assistance

Printer Cable

Your printer connects to your computer with a USB cable. Your printer may not come with a printer 
cable, so if you purchase a cable separately, ensure that it is compatible with your printer. If you 
purchased a printer cable at the same time you purchased your computer, the cable may arrive in 
the computer box. 

Connecting a USB Printer

 

NOTE: 

You can connect USB devices while the computer is turned on.

1

Complete the operating system setup, if you have not already done so.

2

Install the printer driver, if necessary. See the documentation that came with your printer.

3

Attach the USB printer cable to the USB connectors on the computer and the printer. The 
USB connectors only fit into the ports when correctly oriented.

Summary of Contents for Dimension 3100C







































































































































Reviews:

No comments