Dell DD6300 Hardware Overview And Installation Manual Download Page 19

Page: 19 / 80

Back panel

The back panel of the DD6300/DD6800/DD9300 chassis contains the following
components:

1. Management panel

2. Two 2.5" SSD slots labeled 0 and 1 (populated on DD6300 only)

3. I/O module slots

4. Power supply modules (PSU 0 is the lower module, and PSU 1 is the upper

module)

DD6300 rear SSDs

The D6300 system uses one or two 800 GB SSDs mounted at the rear of the chassis
for metadata caching:

Configuration

Number of SSDs

SSD location

DD6300

SSD slot 0

DD6300 expanded

SSD slots 0 and 1

Note

SSDs are not RAID-protected.

Rear LED indicators

Figure 3 Rear LED indicators

1. Do not remove LED
2. SP service LED
3. System power LED
4. AC power good LED
5. DC power good LED

Data Domain DD6300, DD6800, and DD9300 Hardware Overview

Back panel

Summary of Contents for DD6300

















































































Search results

Summary of Contents for DD6300

Reviews:

Related manuals for DD6300

Brands by name

Popular brands

Dell DD6300, Hardware Overview And Installation Manual

Search results

Summary of Contents for DD6300

Reviews:

Related manuals for DD6300

Brands by name

Popular brands