5. Close the
.
6. Install the:
a.
b.
After working inside your computer
.
Intrusion switch
Removing intrusion switch
Before working inside your computer
.
2. Remove the:
a.
b.
3. Open the
.
4. To remove the intrusion switch:
a. Press the latch and disconnect the intrusion switch cable from the connector on the system board and pull the cable [1].
b. Unroute the intrusion switch cable from the fan grommet [2].
c. Slide the intrusion switch and push it to remove from the computer [3].
38
Disassembly and reassembly
