Dell Color Laser Printer 2130cn User Manual Download Page 72

Page: 72 / 204

Insert the tray into the printer, and push until it stops.

Removing Print Jams From the Fuser

Wait for 30 minutes.

Push the side button and open the front cover.

Open the belt unit until it stops.

Lift the levers at both ends of the fuser, and remove the jammed paper. If any jammed paper cannot be found, go to the next step.

The fuser is hot. Do not touch it, doing so may cause burns.

Open the cover of the fuser and remove the jammed paper.

CAUTION:

Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer.

NOTE:

To resolve the error displayed on the operator panel, you must clear all print media from the print media path.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for Color Laser Printer 2130cn













































































































































































































Search results

Summary of Contents for Color Laser Printer 2130cn

Reviews:

Brands by name

Popular brands

Dell Color Laser Printer 2130cn, User Manual

Search results

Summary of Contents for Color Laser Printer 2130cn

Reviews:

Brands by name

Popular brands