manualshive.com logo in svg

Dell Color Laser Printer 2130cn, User Manual

Share
Download
Dell Color Laser Printer 2130cn User Manual Download Page 133

Back to Contents Page

  

 

 About Your Printer  

  

Operator Panel 

 

  

Protecting Your Printer 

 

 

The following illustrations show the standard Dell™ 2130cn Color Laser Printer.

 

  

Provide enough room to open the printer tray, covers, and option. It is also important to allow space around the printer for proper ventilation. 

  

 

Operator Panel  

  

For details on the operator panel, see 

"Operator Panel"

. 

 

Protecting Your Printer  

1  Operator Panel 

6 

Optional 250-Sheet Feeder 

 

 

NOTE: 

Your printer allows for a maximum of 3 trays (standard 250-sheet tray, optional 250-sheet feeder, and single 

sheet feeder). 

2  Side Button 

7  Standard 250-Sheet Tray 

3 

Side Cover (toner cartridges 
inside) 

8  Single Sheet Feeder 

4  Belt Unit 

9 

Front Cover 

 

 

NOTE: 

You can open the front cover by pushing the Side Button. 

5  Duplexer (Sold separately) 

 

  

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for Color Laser Printer 2130cn













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands