Dell Color Laser Printer 2130cn User Manual Download Page 117

Page: 117 / 204

Insert the standard 250-sheet tray into the printer, and push until it stops.

Reconnect all cables including the power cable into the back of the printer and turn on the printer.

Removing a Duplexer

Ensure that the printer is turned off.

Push the side button and open the front cover.

Hold the side button and release the lock of the duplexer by lifting the front edge of it slightly.

Remove the duplexer from the printer by lifting it vertically and holding it horizontally.

Close the front cover.

CAUTION:

Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for Color Laser Printer 2130cn













































































































































































































Search results

Summary of Contents for Color Laser Printer 2130cn

Reviews:

Brands by name

Popular brands

Dell Color Laser Printer 2130cn, User Manual

Search results

Summary of Contents for Color Laser Printer 2130cn

Reviews:

Brands by name

Popular brands