Dell Chromebook 3110, Service Manual

Page: 58 / 68

Steps
1. Align the screw holes on the display hinges with the screw holes on the display back-cover.
2. Replace the two screws (M2.0x3.0) and the four screws (M2.5x2.5) to secure the display hinges to the display back-cover.
3. Adhere the four pieces of aluminum foil to secure the display hinges.
4. Adhere the conductive tape on the left display hinge to secure the display cable in place.
NOTE: For Chromebook 3110 systems shipped with WWAN, route the display cable along the routing channels at the
bottom-left side of the display back-cover and then adhere the piece of conductive tape to secure the display cable in
place.
Next steps
1. Install the display panel .
2. Install the display bezel .
3. Install the display assembly .
4. Install the WWAN card for systems enabled with 4G LTE.
5. Install the base cover .
6. Follow the procedure in After working inside your computer .
58 Removing and installing components