Dell BT-308, Owner'S Manual

Page: 22 / 176

www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
20
Owner’s Manual
To install the mount:
1
Remove the PDA Flex-Arm, Attachment Bracket and PDA Pouch from
the box. You will need to straighten and re-shape to fit your vehicle’s
windshield and dashboard configuration before use.
2
Align the slot on the back of the Attachment Bracket and slide onto
the end of the Flex-Arm.
3
PDA Pouch can now be fastened by first passing the vertical attaching
straps through the back of the Attachment Bracket, then repeat by
passing the horizontal straps through the bracket. Place your PDA into
the jacket and adjust the straps accordingly to create a pocket on the
front-side to properly conform to your PDA.
4
Use a glass cleaner to thoroughly clean the inside of the windshield
where the suction cup will be mounted.
5
Peel the protective paper off the rubber suction cup and decide how
you want to shape the mount so it attaches to the windshield and a
portion rests on the dashboard for support.
6
Pull the lever on the mount back (away from the suction cup), then
place the rubber cup against the glass and move the lever towards the
glass to secure it in place. To release arm, simply move lever back and
pull the protruding rubber tab on the suction cup.