Dell 8DEU3421WE User Manual Download Page 73

Page: 73 / 80

Troubleshooting

│

Poor Focus

Picture is fuzzy,
blurry, or ghosting

• Eliminate video extension cables.

• Reset the monitor to factory settings.

• Change the video resolution to the

correct aspect ratio.

Shaky/Jittery
Video

Wavy picture or
fine movement

• Reset the monitor to factory settings.

• Check environmental factors.

• Relocate the monitor and test in

another room.

Missing Pixels

LCD screen has
spots

• Cycle power On-Off.

• Pixel that is permanently Off is a

natural defect that can occur in LCD
technology.

• For more information on Dell Monitor

Quality and Pixel Policy, see Dell
Support site at:

http://

www.dell.com/pixelguidelines

Stuck-on Pixels

LCD screen has
bright spots

• Cycle power On-Off.

• Pixel that is permanently off is a

natural defect that can occur in LCD
technology.

• For more information on Dell Monitor

Quality and Pixel Policy, see Dell
Support site at:

http://

www.dell.com/pixelguidelines

Brightness
Problems

Picture too dim or
too bright

• Reset the monitor to factory settings.

• Adjust brightness & contrast controls

via OSD.

Geometric
Distortion

Screen not
centered correctly

• Reset the monitor to factory settings.

Summary of Contents for 8DEU3421WE

















































































Search results

Summary of Contents for 8DEU3421WE

Reviews:

Related manuals for 8DEU3421WE

Brands by name

Popular brands

Dell 8DEU3421WE, User Manual

Search results

Summary of Contents for 8DEU3421WE

Reviews:

Related manuals for 8DEU3421WE

Brands by name

Popular brands