Setting up the monitor
│
31
• Toggle the
Joystick
to highlight
DP
.
• Press and hold the
Joystick
for approximately 10 seconds, and the
DisplayPort configuration message appears.
• Toggle the
Joystick
to select
Yes
and then press the joystick to save the
changes.
Repeat the above steps to change the DisplayPort format settings if
necessary.
Connecting the HDMI cable
NOTE: The default out of factory setting is HDMI 2.0. If the monitor
fails to show any content after the HDMI cable is connected, follow the
procedures below to change the settings from HDMI 2.0 to HDMI 1.4:
• Press the
Joystick
to activate the OSD menu.
• Toggle the
Joystick
to highlight
Input Source
, then press the
Joystick
enter the submenu.
• Toggle the
Joystick
to highlight
HDMI 1
or
HDMI 2
.
