2-6
Dell PowerEdge 6100/200 System Service Manual
appears, allowing you to choose the following options or exit to MS-DOS, which
returns to the Dell Server Assistant menu:
•
Run All Tests — Runs all tests for a thorough check of the system
•
Run Quick Tests — Runs selected tests from all test groups to quickly locate
a failure or to indicate where further testing is needed to isolate a failure
•
Run Specific Tests — Tests a particular area or subsystem
NOTE: Before running the diagnostics program, make a blank, formatted
diskette to be inserted in the diskette drive so the diagnostics program can
record critical messages and information as necessary.
See Chapter 5, “Running the System Diagnostics,” in the Installation and Trou-
bleshooting Guide for specific information about the system diagnostics.
G
etting Help
If none of the troubleshooting procedures in this chapter or the tests in the
system diagnostics reveals the source of the problem or leads to the proper
troubleshooting steps for determining the source of the problem, call Dell for
technical assistance. For instructions, see Chapter 11, “Getting Help,” in the
Installation and Troubleshooting Guide.
