Dell 5230 Page 168 User Manual Download

Page: 168 / 193

1565 Emulation error, load emulation option

The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware
card.

Solving printing problems

Multiple-language PDFs do not print

The documents contain unavailable fonts.

Open the document you want to print in Adobe Acrobat.

Click the printer icon.

The Print dialog appears.

Select

Print as image

Click

Printer control panel display is blank or displays only diamonds

The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.

If the clock graphic and

Ready

do not appear, then turn the printer off and contact Customer Support.

Jobs do not print

These are possible solutions. Try one or more of the following:

AKE

SURE

THE

PRINTER

READY

PRINT

Make sure

Ready

Power Saver

appears on the display before sending a job to print.

HECK

SEE

THE

STANDARD

EXIT

BIN

FULL

Remove the stack of paper from the standard exit bin.

HECK

SEE

THE

PAPER

TRAY

EMPTY

Load paper in the tray.

AKE

SURE

THE

CORRECT

PRINTER

SOFTWARE

INSTALLED

•

Verify that you are using the correct printer software.

•

If you are using a USB port, make sure you are running a supported operating system and using compatible
printer software.

Troubleshooting

168

Summary of Contents for 5230


































































































































































































Search results

Summary of Contents for 5230

Reviews:

Related manuals for 5230

Brands by name

Popular brands

Dell 5230, User Manual

Search results

Summary of Contents for 5230

Reviews:

Related manuals for 5230

Brands by name

Popular brands