background image

 

Setting Up Your Dell Travel Mouse With Bluetooth Technology (Part 2) 

If you have the Widcomm Bluetooth Software installed on a Dell notebook computer, complete the following steps: 

All the required mouse software is pre-installed on your notebook computer. If you must restore this software, insert the Setup CD, and then follow the on-
screen instructions.  

 NOTE: To uninstall the SetPoint program, click 

Start

 

®

 

Settings

 

®

 

Control Panel

 

®

 

Add/Remove Programs

. In the 

Add/Remove Programs

 window, select 

SetPoint program, and then click 

Change/Remove

.

 

1.

You must turn off any other Bluetooth-enabled mouse. The receiver may detect a Bluetooth-enabled mouse in the range of 10 meters (30 feet).  

2.

Ensure that your computer's Bluetooth LED is on (blue), then proceed to the next step.  

 NOTE: If your computer

s Bluetooth LED is off, follow your computer

s user manual to enable the Bluetooth radio. 

 

3.

In the Windows taskbar at the bottom of the screen, right-click on the Bluetooth icon, click 

Start Using Bluetooth

, and then follow the instructions to 

activate Bluetooth.  

4.

In the 

Bluetooth Settings

 window, click 

Next

.  

5.

In the 

Bluetooth Service Selection

 window, select 

Human Interface Device

, and then click Next.  

6.

When the 

Bluetooth Device Selection

 window appears, press and hold the Bluetooth button on your mouse for 2 seconds, and then wait for a 

minimum of 20 seconds until Dell Travel Mouse With Bluetooth Technology appears in the list.  

7.

In the 

Bluetooth Device Selection

 window, double-click Dell Travel Mouse With Bluetooth Technology to let your computer connect with your mouse.  

8.

In the 

Confirmation Required

 window, 

Click here before the countdown reaches zero

 to confirm that the correct mouse is connected.  

Setting Up Your Dell Travel Mouse With Bluetooth Technology (Part 3) 

If you have the Windows Vista operating system installed on a Dell notebook computer, complete the following steps: 

All the required mouse software is pre-installed on your notebook computer. If you must restore this software, insert the Setup CD, and then follow the on-
screen instructions.  

 

NOTE: To uninstall the SetPoint program, click 

Start

 

®

 

Settings

 

®

 

Control Panel

 

®

 

Add/Remove Programs

. In the 

Add/Remove Programs

 window, select 

SetPoint program, and then click 

Change/Remove

.

 

1.

You must turn off any other Bluetooth-enabled mouse. The receiver may detect a Bluetooth-enabled mouse in the range of 10 meters (30 feet).  

2.

Ensure that your computer's Bluetooth LED is on (blue), then proceed to the next step.  

 NOTE: If your computer

s Bluetooth LED is off, follow your computer

s user manual to enable the Bluetooth radio. 

 

3.

Click 

Start

 

®

 

Settings

 

®

 

Control Panel

. Ensure that the 

Control Panel

 window is switched to 

Classic View

, and then double-click 

Bluetooth devices

.  

4.

In the 

Bluetooth Devices

 window, click 

Add

.  

5.

Press and hold the Bluetooth button on your mouse for 2 seconds. The blue LED on the mouse starts blinking. Select the 

My device is set up and ready 

to be found

 option, and then click 

Next

.  

6.

When the 

Add Bluetooth Devices Wizard

 window appears, wait for a minimum of 20 seconds until Dell Travel Mouse with Bluetooth Technology 

appears in the list. Select Dell Travel Mouse with Bluetooth Technology from the list and then click 

Next

.  

7.

In the next page, check 

Don

t use a passkey

, and click 

Next

.  

8.

In the next page, click 

Finish

 to connect your computer to the mouse.  

To confirm mouse functionality perform simple operations such as a button/key press and cursor motion. 

For details about using your mouse, refer to 

Mouse: Usage

If your mouse is NOT working, refer to 

Mouse: Troubleshooting

.  

Back to Contents Page

 

NOTE: If you have the Toshiba Bluetooth Software installed or use the Windows Vista operating system on a Dell notebook computer, complete the steps in part 
1 or part 3.

NOTE: If you have the Widcomm Bluetooth Software or the Toshiba Bluetooth Software installed on a Dell notebook computer, complete the steps in part 1 or part 
2.

NOTE: If you failed to setup the mouse, repeat the steps again.

Summary of Contents for 330-1823 - Bluetooth Travel Mouse















Reviews: