Card Reader Troubleshooting
Back to Contents Page
l
Set all Windows audio balance controls (L-R) to their midpoints.
l
Clean and reseat the audio line-in plug.
l
Troubleshoot the computer's sound card.
l
Test the Soundbar using another audio source (i.e. portable CD player).
Low Volume
Volume is too low.
l
Clear any obstructions between the Soundbar and the user.
l
Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting.
l
Set all Windows volume controls to their maximum.
l
Increase the volume of the audio application.
l
Test the Soundbar using another audio source (i.e. portable CD player).
NOTICE:
Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media.
Problem
Cause
Solution
Drive letter is not assigned.
(Windows XP only)
Conflict with network drive letter.
A. Right-click
My Computer
on the desktop, and
then click
Manage
. Under
Computer
Management
, click
Desk Management
.
B. In the list of drives in the right panel, right-click
Removable Device
and then click
Change Drive
Letter and Paths.
C. Click
Change
, and in the drop-down box,
specify a drive letter for the
Removable Device
,
choosing one that is not assigned to the mapped
network drives.
D. Click
OK
, and then click
OK
again.
Drive letter is assigned, but the media
is not accessible
The media needs reformatting.
Right-click the drive in Explorer and choose
Format
from the resulting menu.
The media has been ejected during
writing or erasing.
Displays the error message, "Error copying file or folder."
Displays the error message, "Cannot write folder (folder name) or
file (file name)," during writing, or, "Cannot remove folder (folder
name) or file(file name),". While erasing, you cannot write or erase
in the same folder or file name.
Reinsert the media and write or erase again.
Format the media for writing or erasing the same
folder or file name.
Despite the disappearance of the
pop-up window, the media has been
ejected while the LED was blinking.
Although the pop-up window disappears during writing, if you eject
your media while the LED is still blinking, then you cannot complete
your action on the media.
Format the media for writing or erasing the same
folder or file name.
Cannot format or write on the media.
Write protect switch is enabled.
Verify that the write
- protect switch of the media is
unlocked.
