Dell 2355 Mono Laser Service Manual Download Page 56

Page: 56 / 181

Alignment and Troubleshooting

4-16

Service Manual

Tips for Avoiding Paper Jams

By selecting the correct paper types, most paper jams can be avoided. When a paper jam occurs, follow the
steps outlined in “Clearing Jams in the Paper Tray”.

• Follow the procedures in “Loading Print Media in the Paper Tray”. Ensure that the adjustable guides are

correctly positioned.

• Do not overload the paper tray. Ensure that the paper is below the paper capacity mark on the inside wall of

the paper tray.

• Do not remove the paper from the tray while your printer is printing.

• Flex, fan and straighten the paper before loading.

• Do not use creased, damp or curled paper.

• Do not mix paper types in the paper tray.

• Use only recommended print materials. See “Paper Speciﬁcations”.

• Ensure that the recommended print side of print materials is facing down in the paper tray and facing up in

the MPF.

• Ensure that the duplex unit is installed correctly.

- Cleaning the DADF Pick-up Roller/ Feed Roller

DADF Pick-up Roller

Feed-Roller

Summary of Contents for 2355 Mono Laser






















































































































































































Search results

Summary of Contents for 2355 Mono Laser

Reviews:

Related manuals for 2355 Mono Laser

Brands by name

Popular brands

Dell 2355 Mono Laser, Service Manual

Search results

Summary of Contents for 2355 Mono Laser

Reviews:

Related manuals for 2355 Mono Laser

Brands by name

Popular brands