Dell 2355 Mono Laser, Service Manual

Page: 43 / 181

Alignment and Troubleshooting
4-3
Service Manual
■ Description of ENGINE JAM type (Simplex)
Type Case Jam Removal Jam Layout
Jam 0
Leading edge of media does
not arrive at registration within a
certain time after pick-up(If fails
at a time,it tries pick-up again)
1. Pull out cassette
2. Remove jammed paper
Jam 1
Leading edge of media does not
arrive at Exit Sensor within a
certain time after registration
1. Open front cover
2. Pull out toner cartridge
3. Remove jammed paper
Jam 2
Trailing edge of media does not
leave Exit Sensor within a certain
time after touching registration
1. Open rear cover
2. Pull down jam lever on fuser
unit and open fuser cover)
3. Remove jammed paper from
exit
■ Description of ENGINE JAM type (Duplex)
Type Case Jam Removal Jam Layout
Duplex
Jam 1
Trailing edge of media leaves
Exit Sensor, and does not arrive
at Duplex Sensor
1. Open rear cover
2. Remove jammed paper
OR
1. Pull out duplex unit
2. Remove jammed paper from
duplex unit
Duplex
Jam 0
Leading edge of media does
not arrive at registration within
a certain time after touching
Duplex Sensor
1. Open rear cover
2. Remove jammed paper
OR
1. Pull out duplex unit
2. Remove jammed paper from
duplex unit