40
|
Scanning
4.
Select a location number and enter the user name and e-mail address
you want.
5.
Click
Apply
.
Configuring group email numbers
Enter your printer’s IP address as the URL in a browser and click
Go
to
access the web site of your printer.
1.
Click
Machine Settings
and
E-mail Setup
.
2.
Click
Group Address Book
and
Add
.
3.
Select a group number and enter the group name you want.
4.
Select speed email numbers that will be included in the group.
5.
Click
Apply
.
Retrieving global email addresses from the LDAP
server
You can use not only local addresses stored in your printer's memory but
also ones in the LDAP server. To use the global addresses, configure the
LDAP server first via Embedded Web Service as following:
1.
Enter your printer’s IP address as the URL in a browser and click
Go
to
access the web site of your printer.
2.
Click
Machine Settings
,
LDAP Server Setup
.
3.
Select
IP Address
or
Host Name
.
4.
Enter the IP address in dotted decimal notation or as a host name.
5.
Enter the server port number, from 1 to 65535.
The default port number is 389.
6.
Enter
Search Root Directory
. The top search level of the LDAP
directory tree.
7.
Select
Authentication method
. Method of LDAP server login.
Anonymous
: This is used to bind with NULL password and login ID
(Password and login ID are grayed in Embedded Web Service).
Simple
: This is used to bind with the login ID and password in
Embedded Web Service.
8.
Put a check mark of
Append Root to Base DN
for adding
Base DN
to
login name.
9.
Enter your login name, password, maximum number of search results
and search timeout.
10.
Select
Serach Name Order
that you want.
11.
Put a check mark of
"From:" Field Security Options
.
12.
Click
Add
.
Using address book entries
To retrieve an email address, use the following ways:
Speed email numbers
When you are prompted to enter a destination address while sending an
email, enter the speed email number at which you stored the address
you want.
•
For a one-digit speed email location, press and hold the
corresponding digit button from the number keypad.
•
For a two- or three-digit speed email location, press the first digit
button(s) and then hold down the last digit button.
You can also search through memory for an entry by pressing
Address
Book
. See "Searching address book for an entry" on page 40.
Group email numbers
To use a group email entry, you need to search for and select it from
memory.
When you are prompted to enter a destination address while sending an
email, press
Address Book
. See "Searching address book for an
entry" on page 40.
Global email addresses
To use a global email addresses in the LDAP server, you need to search
for and select it from memory.
When you are prompted to enter a destination address while sending an
email, press
Address Book
. See "Setting up address book" on
page 39.
Searching address book for an entry
There are two ways to search for an address in memory. You can either
scan from A to Z sequentially or search by entering the first letters of the
name associated with the address.
Searching sequentially through memory
1.
If necessary, press
Scan/Email
.
2.
Press
Address Book
until
Search & Send
appears on the
bottom line of the display and press
OK
.
3.
Press the left/right arrow until the number category you want
appears and press
OK
.
4.
Press
OK
when
All
appears.
5.
Press the left/right arrow until the name and address you want
appears. You can search upwards or downwards through the entire
memory in alphabetical order.
Searching with a particular first letter
1.
If necessary, press
Scan/Email
.
2.
Press
Address Book
until
Search & Send
appears on the
bottom line of the display and press
OK
.
3.
Press the left/right arrow until the number category you want
appears and press
OK
.
4.
Press the left/right arrow until
ID
appears and press
OK
.
5.
Enter the first few letters of the name you want and press
OK
.
6.
Press the left/right arrow until the name you want appears and press
OK
.
Printing address book
You can check your
Address Book
settings by printing a list.
1.
Press
Address Book
until
appears on the bottom line of the
display.
2.
Press
OK
.
A list showing your speed button settings, and the speed/group email
entries print out.
You can also click Import and obtain your address book from your
computer.
LDAP Referral
: LDAP client will search referral server in case
LDAP server has no data to reply of query and LDAP server has
any referral server.
