28 | Setting Up the Monitor
6
Attach the stand assembly to the monitor.
a
.Fit the two tabs on the upper part of the stand to the groove on the back of the
monitor.
b
.Press the stand down till it snaps into place.
7
Place the monitor upright.
NOTE:
Lift the monitor carefully to prevent it from slipping or falling.
Using the Tilt, Swivel, and Vertical Extension
NOTE:
This is applicable for a monitor with a stand. If you purchased any other
stand, refer to the respective stand setup guide for set up instructions.
Tilt, Swivel
With the built-in pedestal, you can tilt the monitor for the most comfortable viewing angle.
NOTE:
The stand is detached when the monitor is shipped from the factory.
