background image

Notes, cautions, and warnings

 

NOTE:

 A NOTE indicates important information that helps you make better 

use of your computer.

 

CAUTION:

 A CAUTION indicates potential damage to hardware or loss of 

data if instructions are not followed.

 

WARNING: A WARNING indicates a potential for property damage, personal 
injury or death.

_________________________

Information in this document is subject to change without notice.  
© 2017 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission 
of Dell Inc. is strictly forbidden.

Trademarks used in this text: 

Dell

 and the 

DELL

 logo are trademarks of Dell Inc.; 

Microsoft

 

and 

Windows

 are either trademarks or registered trademarks of Microsoft. Corporation in 

the United States and/or other countries, 

Intel

 is a registered trademark of Intel Corporation 

in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, Inc. 
ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an 
ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR 
guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the 
entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary 
interest in trademarks and trade names other than its own.

2017 - 03 

Rev. A01

Summary of Contents for 210-ALIO

















































Reviews: