After you have completed connecting the DVI/VGA cable, follow the procedure below to connect the USB cable to the computer and complete your monitor
setup:
l
Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer.
l
Connect USB peripherals to the downstream USB ports (rear or side) on the monitor. (See
rear
or
bottom
view for details.)
l
Plug the power cables for your computer and monitor into a nearby outlet.
l
Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
Solving Problems
.
l
Use the cable holder on the monitor stand to organize the cables.
Organizing the Cables
After attaching all the necessary cables to your monitor and computer, (See
Connecting Your Monitor
for cable attachment,) use the cable management slot
to organize all cables as shown above.
Attaching the Soundbar
NOTE:
The graphics are used for the purpose of illustration only. Appearance of the computer may vary.
