Dell 1907FPf, Service Manual

Page: 4 / 80

Service Manual
3
Chapter 1- PRECAUTIONS & SAFETY NOTICES
SAFETY PRECAUTIONS
This monitor is manufactured and tested on a ground principle that a user’s safety comes first.
However, improper used or installation may cause damage to the monitor as well as to the user.
WARNINGS:
l
This monitor should be operated only at the correct power sources indicated on the rating label on
the rear cover of the monitor. If yo u’re unsure the power supply in your residence, consult your
local dealer or Power Company.
l
Use only the specified power cord that comes with this monitor.
l
Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor
should only be repaired by a qualified technician.
l
Do not remove the monitor cabinet. There is high- voltage parts inside that may cause electric shock
to human bodies.
l
Stop using the monitor if the cabinet is damaged. Have it checked by a service technician.
l
Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable
immediately and consult your closed dealer.
l
Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply
non-ammonia based cleaner onto the cloth, not directly onto the class screen.
l
Do not place heavy objects on the monitor or power cord.
PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety visual inspections and the
protection afforded by them cannot necessarily be obtained by using replacement components rated
for higher voltage, wattage, etc. Before replacing any of these components read the parts list in this
manual carefully. The use of substitute replacement parts, which do not have the same safety
characteristics as specified in the parts list, may create shock, fire, or other hazards.
SERVICE NOTES
l
When replacing parts on circuit boards, clamp the solder wires around terminals before soldering.
l
Keep wires away from high voltage, high temperature components and sharp edges.
l
Keep wires in their original position so as to reduce interference.
l
Adjustment of this product please refers to the user’ manual.
l
Use Pb free solder wire for circuit board preparation.