Back to Contents Page
System Board Assembly
Dell™ Studio 1535/1536 Service Manual
The BIOS chip in the system board contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes media that provides a utility for transferring the Service Tag to the replacement system board.
Removing the System Board Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Remove memory module(s) (see
Removing Memory Module(s)
).
3.
Remove the hard drive (see
Removing the Hard Drive
).
4.
Remove the Mini-Card (see
Removing the Mini-Card
).
5.
Remove the processor thermal-cooling assembly (see
Removing the Processor Thermal-Cooling Assembly
).
6.
Remove the processor (see
Removing the Processor Module
).
7.
Remove the center control cover (see
Removing the Center Control Cover
).
8.
Remove the keyboard (see
Removing the Keyboard
).
9.
Remove the display assembly (see
Removing the Display Assembly
).
10.
Remove the palm rest (see
Removing the Palm Rest
).
11.
Remove the optical drive (see
Removing the Optical Drive
).
12.
Remove the four screws from the top of the system board.
13.
Disconnect the system board cable and remove the system board.
Replacing the System Board Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1 screws (4) 2 system board connector
NOTE:
Depending on your system configuration, the number of screws shown here may be greater than the number of screws present in your
computer.
Summary of Contents for 1537 - Studio Core 2 Duo T6400 2.0GHz 4GB 320GB
Page 15: ......
Page 34: ...Back to Contents Page ...
Page 36: ...Back to Contents Page 1 optical drive 2 optical drive interposer ...
