Dell 1537 - Studio Core 2 Duo T6400 2.0GHz 4GB 320GB, Setup Manual

Page: 36 / 84

34
Solving Problems
If the power light is blinking amber — The
computer is receiving electrical power, but a
device might be malfunctioning or incorrectly
installed. You may have to remove and then
reinstall the memory modules (for information on
removing and replacing memory modules, see
the
Service Manual on the Dell Support website
at support.dell.com ).
If you encounter interference that hinders
reception on your computer
— An unwanted
signal is creating interference by interrupting or
blocking other signals. Some possible causes of
interference are:
Power, keyboard, and mouse extension •
cables.
Too many devices connected to a power •
strip.
Multiple power strips connected to the same •
electrical outlet.
Memory Problems
If you receive an insufficient memory
message—
Save and close any open files and exit any •
open programs you are not using to see if
that resolves the problem.
See the software documentation for •
minimum memory requirements. If
necessary, install additional memory (See
the
Service Manual on the Dell Support
website at support.dell.com ).
Reseat the memory modules (See the •
Service Manual on the Dell Support website
at support.dell.com ) to ensure that your
computer is successfully communicating
with the memory.
If you experience other memory problems —
Ensure that you are following the memory •
installation guidelines (see the Service
Manual on the Dell Support website at
support.dell.com ).