6.
Connect the display cable to the display cable connector on the system board.
7.
Connect the camera cables to the camera cable connector on the system board.
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the center control cover (see
Replacing the Center Control Cover
).
10.
Close the display and turn the computer over.
11.
Replace and tighten the two screws securing the display assembly from the bottom of the computer.
12.
Connect the antennae cables to the Mini-Cards (see
Wireless Mini- Cards
).
13.
Replace the back cover and tighten the eight captive screws on the cover.
Display Bezel
Removing the Display Bezel
1.
Follow the instructions in
Before You Begin
.
2.
Remove the center control cover (see
Removing the Center Control Cover
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the display assembly (see
Removing the Display Assembly
).
5.
Remove the six rubber display bumpers from around the display bezel.
6.
Remove the captive screw and five shoulder screws from around the display bezel.
7.
Starting from the bottom corner of the display panel, use your fingers to pry the bezel from the top cover, then lift the inside edges to separate the
NOTE:
Ensure that the display cable, camera cable, and antenna cables are properly routed and secured beneath the plastic tabs.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
1 captive screw
2 rubber display bumpers (6)
3 shoulder screws (5) 4 display panel
5 display bezel
NOTICE:
Removal of the bezel from the display back cover requires extreme care to avoid damage to the bezel and the display panel.
Summary of Contents for 1525 - Inspiron - Pentium Dual Core 1.86 GHz
Page 24: ......
Page 28: ......
Page 42: ...Back to Contents Page 9 TMDS Data 0 19 Hot Plug Detect 10 TMDS Clock 20 SHELL ...
Page 45: ......
