Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Page 104 Service Manual Download

Page: 104 / 116

104

USB Daughter Card

FILE LOCATION:

C:\Documents and Settings\sarah_cook\Desktop\Tsing

Ma\SM\A01\EN\Source\daughcard.fm

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Replacing the USB Daughter Card

CAUTION:

Before you begin the following procedure, follow the safety

instructions that shipped with your computer.

This procedure assumes that you have completed the removal procedure
"Removing the USB Daughter Card" on page 103.

Replace the M2.5 x 5-mm screw to secure the daughter card to the
computer base.

Connect the daughter card connector to the daughter card.

Replace the

internal card with Bluetooth wireless technology, if installed

(see "Removing the Card

" on page 87

Replace the palm rest (see "Replacing the Palm Rest" on page 81).

daughter-card connector

M2.5 x 5-mm screw (1)

USB daughter card

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands