Dell 13 7000 2-in-1 Service Manual Download Page 84

Page: 84 / 95

Table 8. System setup options—Intel Software Guard Extensions menu

Intel Software Guard Extensions

Intel SGX Enable

Enable or disable Intel Software Guard Extensions.

Enclave Memory Size

Set the Intel Software Guard Extensions Enclave
Reserve Memory Size.

Table 9. System setup options—Performance menu

Performance

Multi Core Support

Enable multiple cores.
Default: Enabled.

Intel SpeedStep

Enable or disable Intel Speedstep Technology.
Default: Enabled.

NOTE: If enabled, the processor clock speed
and core voltage are adjusted dynamically
based on the processor load.

C-States Control

Enable or disable additional processor sleep states.
Default: Enabled.

Intel TurboBoost

Enable or disable Intel TurboBoost mode of the
processor.
Default: Enabled.

HyperThread control

Enable or disable HyperThreading in the processor.
Default: Enabled.

Table 10. System setup options—Power Management menu

Power Management

Enable Intel Speed Shift
Technology

Enable or disable Intel Speed Shift Technology
support. Enables the operating system to select the
appropriate processor performance automatically.

Auto on Time

Enable to set the computer to turn on automatically
every day or on a preselected date and time. This
option can be configured only if the Auto On Time is
set to Everyday, Weekdays or Selected Days.
Default: Disabled.

Summary of Contents for 13 7000 2-in-1
































































































Search results

Summary of Contents for 13 7000 2-in-1

Reviews:

Related manuals for 13 7000 2-in-1

Brands by name

Popular brands

Dell 13 7000 2-in-1, Service Manual

Search results

Summary of Contents for 13 7000 2-in-1

Reviews:

Related manuals for 13 7000 2-in-1

Brands by name

Popular brands