Dell EMC VMAX3, Site Planning Manual

Page: 85 / 100

Table 23 Dispersion kit model numbers (continued)
Model Description
E-DSOPTICE5 VMAX VG SYS BAY 5 DSP CBLOPTICS KIT
E-DSOPTICE5U VMAX VG SYS BAY 5 DSP CBLOPTICS KIT
UPG
E-DSOPTICE6 VMAX VG SYS BAY 6 DSP CBLOPTICS KIT
E-DSOPTICE6U VMAX VG SYS BAY 6 DSP CBLOPTICS KIT
UPG
E-DSOPTICE7 VMAX VG SYS BAY 7 DSP CBLOPTICS KIT
E-DSOPTICE7U VMAX VG SYS BAY 7 DSP CBLOPTICS KIT
UPG
E-DSOPTICE8 VMAX VG SYS BAY 8 DSP CBLOPTICS KIT
E-DSOPTICE8U VMAX VG SYS BAY 8 DSP CBLOPTICS KIT
UPG
Securing kits
The Securing Kits contain heavy brackets plus hardware used to attach the brackets to the frames
of the system bays. The brackets are attached to the floor using bolts that engage the flooring
substructure provided by the customer.
The Dell EMC VMAX Securing Kit Installation Guide provides installation instructions.
Table 24 Securing kit models
Model Description
E-SECURE Secure kit for single bay
E-SECUREADD Secure kit for joining bays
GridRunner kit and customer-supplied cable trough
The Dell EMC GridRunner
™
bottom routing kit (E-BOT-KIT) and customer-supplied cable troughs
can help organize and protect subfloor cables that connect separated bays. GridRunners reduce
the vertical drop of the dispersion cables, which may increase the distance between the separated
bays.
Each GridRunner supports the cable bundle above the subfloor. GridRunners are installed with
brackets that attach to the stanchions under the raised floor. The stanchions are up to one inch in
diameter, measured at six inches (15.24 cm) below the raised tiles.
To ensure sufficient support of the cable bundle, a GridRunner should be installed every two
meters.
Optional kits
Dell EMC
™
VMAX3
™
Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K 85