About this guide
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting your switch,
inserting modules, and connecting to a power source.
CAUTION:
To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.
NOTE:
Only trained and qualified personnel can install this equipment. Read this guide before you install and power up
this equipment. This equipment contains two power cords. Disconnect both power cords before servicing.
NOTE:
This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1 laser product tag
NOTE:
When no cable is connected, visible and invisible laser radiation may emit from the aperture of the optical
transceiver ports. Avoid exposure to laser radiation. Do not stare into open apertures.
NOTE:
Read this guide before unpacking the switch. For unpacking instructions, see
Regulatory
•
Marketing model N3248PXE-ON is represented by the regulatory model E32W and the regulatory type E32W004.
•
Marketing model N3248P-ON is represented by the regulatory model E32W and the regulatory type E32W003.
Topics:
•
•
Related documents
For more information about the N3200-ON Series, see the following documents:
•
Dell EMC PowerSwitch N3200-ON Series Warnings Guide
•
Dell EMC PowerSwitch N3200-ON Series Set-Up Placemat
•
Dell EMC PowerSwitch N3200-ON Series Release Notes
•
Open Networking Hardware Diagnostic Guide N2200-ON and N3200-ON Series Switches
•
External Power Supply (EPS) Installation for the Dell EMC PowerSwitch N2200-ON and N3200-ON Series Switches
NOTE:
For the most recent documentation, see Dell EMC support:
.
1
About this guide
5
