Table 21. UEFI iSCSI Settings screen details
Option
Description
iSCSI Initiator Name
Specifies the name of the iSCSI initiator in IQN format.
iSCSI Device1
Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the
iSCSI device automatically. This is set to
Disabled
by default.
iSCSI Device1 Settings
Enables you to control the configuration of the iSCSI device.
Table 22. ISCSI Device1 Settings screen details
Option
Description
Connection 1
Enables or disables the iSCSI connection. This option is set to
Disable
by default.
Connection 2
Enables or disables the iSCSI connection. This option is set to
Disable
by default.
Connection 1 Settings
Enables you to control the configuration for the iSCSI connection.
Connection 2 Settings
Enables you to control the configuration for the iSCSI connection.
Connection Order
Enables you to control the order for which the iSCSI connections will be attempted.
Integrated Devices
To view the
Integrated Devices
screen, power on the system, press F2, and click
System Setup Main Menu
>
System BIOS
>
Integrated Devices
.
Table 23. Integrated Devices details
Option
Description
User Accessible USB Ports
Configures the user accessible USB ports. Selecting
Only Back Ports On
disables
the front USB ports; selecting
All Ports Off
disables all front and back USB ports.
This option is set to
All Ports On
by default.
The USB keyboard and mouse still function in certain USB ports during the boot
process, depending on the selection. After the boot process is complete, the USB
ports will be enabled or disabled as per the setting.
Internal
USB
Port
Enables or disables the
Internal
USB
Port
. This option is set to
On
or
Off
. This
option is set to
On
by default.
NOTE:
The Internal SD Card Port on the PCIe riser is controlled by
Internal USB Port.
iDRAC Direct USB Port
The iDRAC Direct USB port is managed by iDRAC exclusively with no host visibility.
This option is set to
ON
or
OFF
. When set to
OFF
, iDRAC does not detect any USB
devices installed in this managed port. This option is set to
On
by default.
Integrated RAID Controller
Enables or disables the integrated RAID controller. This option is set to
Enabled
by
default.
Embedded NIC1 and NIC2
Enables or disables the
Embedded NIC1 and NIC2
options. If set to
Disabled
(OS)
, the NIC may still be available for shared network access by the embedded
management controller. Configure the
Embedded NIC1 and NIC2
option by using
the NIC management utilities of the system.
I/OAT DMA Engine
Enables or disables the I/O Acceleration Technology (I/OAT) option. I/OAT is a set
of DMA features designed to accelerate network traffic and lower CPU utilization.
Enable only if the hardware and software support the feature. This option is set to
Disabled
by default.
Embedded Video Controller
Enables or disables the use of Embedded Video Controller as the primary display.
When set to
Enabled
, the Embedded Video Controller will be the primary display
even if add-in graphic cards are installed. When set to
Disabled
, an add-in graphics
card will be used as the primary display. BIOS will output displays to both the primary
add-in video and the embedded video during POST and pre-boot environment. The
42
Pre-operating system management applications