Steps
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. Connect the system fan cable to the connector on the system board.
3. Tighten the four captive screws that secure the heat sink to the system board.
4. Replace the two screws (M2x5) that secures the heat sink to the system board.
Next steps
1. Install the
.
2. Install the
.
3. Install the
4. Install the
.
After working inside your computer
.
Speakers
Removing the speaker
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
4. Remove the
.
5. Remove the
.
6. Remove the
.
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
Removing and installing components
45
Summary of Contents for Latitude 5420
