Dell EMC Inspiron 3671, Service Manual

Page: 23 / 73

Replacing the solid-state drive/Intel Optane
Enable the Intel Optane device after you replace it. For more information about enabling the Intel Optane device, see Enabling Intel Optane
memory .
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer . After working inside your computer, follow the instructions in After
working inside your computer . For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance .
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Procedure
1. Align the notch on the solid-state drive or Intel Optane memory with the tab on the M.2 card slot.
2. Slide the solid-state drive or Intel Optane memory into the M.2 card slot on the system board.
3. Replace the screw (M2x3.5) that secures the solid-state drive or Intel Optane memory to the system board.
Post-requisites
Replace the computer cover .
13
Replacing the solid-state drive/Intel Optane 23