Dell EMC E26S Series, Owner'S Manual

Page: 109 / 189

Related references
安全 说 明
on page 72
Related tasks
拆装系 统 内 部 组 件之前
on page 73
安装 扩 展卡
on page 110
Installing expansion card risers on page 111
拆装系 统 内 部 组 件之后
on page 73
Identifier GUID-6B29D012-C73E-41D2-866B-E88F634F5786
Version 5
Status Released
Removing an expansion card
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
CAUTION:
多 数 维 修只能由 经认证 的 维 修技 术 人 员进 行。 您 只能根据 产 品 说 明文件中的授 权 ，或者在 联 机或 电话 服 务 和支持
团队 的指 导 下 进 行故障排除和 简单维 修。任何未 经
Dell
授 权 的服 务 所 导 致的 损 坏均不在保修范 围 之列。 请阅读 并 遵循 您 的
产 品附 带 的安全 说 明。
1. Disconnect any cables connected to the expansion card or expansion card riser.
2. To remove the expansion card, lift the expansion card latch.
3. Hold the expansion card by its edges and remove it from the expansion card connector on the riser.
4. If you are removing the card permanently, install a metal filler bracket over the empty expansion slot opening and close the
expansion card latch.
NOTE: You must install filler bracket over an empty expansion card slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
Figure 50. Removing an expansion card
1. expansion card connector 2. expansion card latch
3. expansion card 4. expansion card connector on the system board
Follow the procedure listed in the After working inside your system section.
Related references
安全 说 明
on page 72
安装和卸下系 统组 件
109