manualshive.com logo in svg

Dell EMC E02B, Installation And Service Manual, Page: 4 / 108

Share
Download
Dell EMC E02B Installation And Service Manual Download Page 4

System Setup................................................................................................................................................................... 24

Viewing System Setup.............................................................................................................................................. 24
System Setup details.................................................................................................................................................25
System BIOS.............................................................................................................................................................. 25
iDRAC Settings utility................................................................................................................................................ 45
Device Settings.......................................................................................................................................................... 45

Dell Lifecycle Controller...................................................................................................................................................45

Embedded system management............................................................................................................................. 45

Boot Manager.................................................................................................................................................................. 45

Viewing Boot Manager..............................................................................................................................................45
Boot Manager main menu........................................................................................................................................ 46
One-shot UEFI boot menu........................................................................................................................................46
System Utilities...........................................................................................................................................................46

PXE boot...........................................................................................................................................................................46

6 Installing and removing system components................................................................................................ 47

Safety instructions........................................................................................................................................................... 47
Before working inside your system................................................................................................................................ 47
After working inside your system................................................................................................................................... 47
Recommended tools........................................................................................................................................................ 47
Removing the system from the enclosure....................................................................................................................48
Installing the system into the enclosure........................................................................................................................ 49
Inside the system.............................................................................................................................................................. 51
Air shroud..........................................................................................................................................................................52

Removing the air shroud........................................................................................................................................... 52
Installing the air shroud............................................................................................................................................. 53

Drives.................................................................................................................................................................................54

Removing a drive blank............................................................................................................................................. 54
Installing a drive blank............................................................................................................................................... 55
Removing a drive carrier........................................................................................................................................... 56
Installing a drive carrier..............................................................................................................................................57
Removing a drive from a drive carrier..................................................................................................................... 58
Installing a drive into drive carrier............................................................................................................................ 59
Removing the drive cage.......................................................................................................................................... 60
Installing the drive cage............................................................................................................................................. 61

Drive backplane................................................................................................................................................................62

Removing the drive backplane................................................................................................................................. 62
Installing the drive backplane................................................................................................................................... 64

System memory............................................................................................................................................................... 67

System memory guidelines....................................................................................................................................... 67
General memory module installation guidelines...................................................................................................... 67
Mode-specific guidelines.......................................................................................................................................... 68
Removing a memory module.................................................................................................................................... 70
Installing a memory module....................................................................................................................................... 71

Processors and heat sinks...............................................................................................................................................72

Removing a processor and heat sink module......................................................................................................... 72

4

Contents

Summary of Contents for E02B













































































































Reviews:

No comments