manualshive.com logo in svg

Dell EMC BOSS-S1, User Manual

Share
Download
Dell EMC BOSS-S1 User Manual Download Page 6

•

Supported operating systems

•

Supported PowerEdge systems 

•

BOSS-S1 card specifications

•

Management applications for the BOSS-S1 controller

•

Updating the BOSS-S1 controller

•

Methods to update the BOSS-S1 firmware

•

Related documentation

Supported operating systems

The BOSS-S1 card supports the following operating systems:

•

Microsoft Windows Server 2012 R2

•

Microsoft Windows Server 2016

•

Red Hat Enterprise Linux version 6.9

•

Red Hat Enterprise Linux version 7.4

•

SUSE Linux Enterprise Server version 12 SP3

•

VMware ESXi 6.0 Update 3

•

VMware ESXi 6.5 Update 1

•

Ubuntu version 16.04

NOTE: 

For the latest list of supported operating systems and driver installation instructions, see the system documentation at 

Dell.com/operatingsystemmanuals. For specific operating system service pack requirements, see the Drivers and Downloads 
section at Dell.com/manuals.

Supported PowerEdge systems 

The following PowerEdge systems support the BOSS-S1 adapter card:

•

PowerEdge C4140

•

PowerEdge R440

•

PowerEdge R540

•

PowerEdge R540xd

•

PowerEdge R640

•

PowerEdge R740

•

PowerEdge R740xd

•

PowerEdge R940

•

PowerEdge R6415

•

PowerEdge R7415

•

PowerEdge R7425

•

PowerEdge T640

•

PowerEdge T440

The following PowerEdge systems support the BOSS-S1 modular card:

•

PowerEdge C6420

•

PowerEdge FC640

•

PowerEdge M640 (for M1000e)

•

PowerEdge M640 (for VRTX)

6

Overview

Summary of Contents for BOSS-S1





























Reviews:

No comments

Brands by name

Popular brands

Load more brands