manualshive.com logo in svg

Dell EMC BOSS-S1, User Manual

Share
Download
Dell EMC BOSS-S1 User Manual Download Page 18

UEFI/HII RAID configuration utility

The Unified Extensible Firmware Interface (UEFI) RAID configuration utility is a storage management application integrated into the System 
BIOS <F2>. It is used to configure and manage RAID disk groups, virtual disks, and physical disks. This utility is independent of the 
operating system.

The following sections provide information about using the UEFI RAID configuration utility. For more information, see the online help option 
in the UEFI RAID configuration utility.

NOTE: 

Use the UEFI RAID configuration utility for initial setup and disaster recovery. Certain advanced features are also offered

 

in the utility.

 

Topics:

•

Entering the UEFI configuration utility

•

Exiting the UEFI configuration utility

•

Navigating to BOSS-S1 configuration utility

•

Physical/virtual disk information

•

Creating virtual disks

•

Deleting virtual disks

•

RAID rebuild

•

Erase physical disk

•

Controller information

Entering the UEFI configuration utility

Perform the following steps to boot to the UEFI configuration utility:

1 

Turn on the system.

2 

While the system is booting, press <F2> to enter 

System Setup

.

3 

Click 

Device Settings

.

Device Settings

 lists all the RAID controllers in the system.

To access the management menu for the controller, use the arrow keys or the mouse.

NOTE: 

For more information in all the options, click Help that is available on the top right-hand corner of the browser 

screen. Help information for individual option menus can also be viewed by scrolling down on each option.

NOTE: 

Some of the options within the UEFI RAID configuration utility are not present if the controller does not support 

the corresponding feature. Options may also be grayed out if the feature is not supported in the existing configuration.

Exiting the UEFI configuration utility

To exit the UEFI configuration utility, perform the following steps:

1 

Click 

Finish

 at the bottom-right corner on the 

System Setup Main Menu

 screen.

5

18

UEFI/HII RAID configuration utility

Summary of Contents for BOSS-S1





























Reviews:

No comments

Brands by name

Popular brands

Load more brands