Deliberant DBL2119, User Manual

Page: 61 / 65

60
Menu Tree List
A. Operation Mode
B. Wireless Setting
C. TCP/IP-LAN Setting
D. TCP/IP-WAN Setting
E. Route Setting
F. Firewall Setting
G. Management
H. Apply Changes to Flash
I. Reboot to take effect
0. Exit
Wireless Setting
A. Basic Settings
B. Advanced Settings
C. Security Settings
D. Access Control Settings
E. WDS Settings
0. Exit
TCP/IP WAN Settings
A. WAN Type
B. IP Address
C. Subnet Mask
D. Default Gateway
E. DNS1
F. DNS2
G. DNS3
Y. Clone MAC Address
Z. uPNP
0. Exit
Route Settings
-[Dynamic Route]------------------
A. Dynamic Route
B. RIP transmit to WAN
C. RIP receive from WAN
D. RIP transmit to LAN
E. RIP receive from LAN
-[Static Route]-----------------------
F. Static Route
G. Add Static Route Setting
H. Delete Static Route Setting
I. Delete all Static Route Setting
J. Current Static Route Setting List
-[Route Table]------------------------
K. Show Route Table List
0. Exit
Wireless Basic Settings
A. Access Point Status
B. QoS Settings
C. Bandwidth Control
D. SNMP Settings
E. Password
0. Exit
Firewall Settings
A. Port Filtering
B. IP Filtering
C. MAC Filtering
D. Port Forwarding
E. DMZ
0. Exit
Operation Mode
1: Router
2: Bridge
0: Cancel
TCP/IP-LAN Setting
A. IP Address
B. Subnet Mask
C. Default Gateway
D. DHCP
E. DHCP Client Range
F. 802.1d Spanning Tree
G. Clone MAC Address
H. MTU Size
0. Exit
Password
The SSH Configuration interface has password protection. Please note that this password is separate from the web
configuration password.