Deliberant DBL2119, User Manual

Page: 35 / 65

34
Description Entries of WDS AP List
Spanning Tree
Protocol Required
Access Point The MAC Address of Repeater Yes
Repeater The MAC Address of Access Point Yes
Wireless Bridge
As a Wireless Bridge the device can establish a wireless connection between two or more Wired LANs. When you decide to
use the WDS as a Wireless Bridge, please refer the following instructions for configuration.
In AP mode, enable the WDS function. You must set these connected devices to the same radio channel, but you may use
different SSID.
Choose
“WDS” mode for only wireless backbone extension purpose. You can use any network topology, please refer the
WDS topology section.
Site Survey
This tool allows you to scan for nearby wireless networks. If any Access Point or IBSS is found, you can choose to connect it
manually when client mode is enabled.
Connecting Profile
If you enable the connecting profile in client mode, the system will check the preferred SSID and BSSID in a fixed
period. If preferred APs are found, the radio will try to connect to them one by one regardless of the signal quality
and strength. Please note that checking the preferred APs will have a significant impact on throughput. All the
profiles share the same security settings.